Question:
How do I know when it's time to clean my pool filter?
Answer:
Normal, periodic rinsing or backwashing will remove most of the dirt from a basically clean filter. However, over a period of time, grease, oils and scale can attack and build up on the elements. When this occurs, you will see build up on the removable elements, short filter runs, reduced circulation and water that does not want to clear up.
Question:
Why is filtration important to the quality of swimming pool water?
Answer:
Filtration is the mechanical system for removing visible matter from the water. The filter medium is designed to remove hair, dirt, minute skin flakes, metal or calcium precipitates and other visible debris that would otherwise cause the water to be hazy and cloudy.
Question:
How often should I change the water in my pool?
Answer:
When your TDS (Total Dissolved Solids) are in excess of 2,000 PPM. Approximately every 3 to 5 years.
The ideal range of TDS is from 1000 to 2000 PPM, and the maximum level is 2500 PPM to 3000 PPM. There is no way to reduce TDS chemically. You must drain or partially drain the pool and replace with fresh water.
More FAQS comeing soon.....
Enjoy Your Pool & Spa
Let Us Do The Service
Salt System Installation
Pump Installation
Filter Installation
Cleaner/Sweep Installation
Equipment Repairs
Green Pool Clean Up's Equipment Repairs/Up Grades
Pool Supplies
Filter Cleaning
Other Services :
We offer free estimates to customers that fall within our service areas. Estimates given over the phone are generally a ball park figure. Accurate estimates will need a visual inspection of the job site. Please call or email for an appointment.
Free Estimates
E-mail
Sta Clean Pool & Spa
Pool equipment and supplies from Hayward, Pentair, Sta Rite, Raypac, Jandy, Polaris and more. Need a part E-mail or call us toll free
888-486-2149.